How to Fix 79Bike Falcon Pro Suddenly Losing Power

If you own a 79Bike Falcon Pro and have experienced the frustrating issue of it suddenly losing power, you’re not alone. This common problem can be caused by various factors, but the good news is that many of these issues can be fixed with some basic troubleshooting. In this article, we’ll walk you through the steps to diagnose and fix the problem, ensuring your 79Bike Falcon Pro is back on the road in no time.

Step 1: Check if the Fuse is Blown and Replace it if Necessary

Inspecting the Fuse

The first step in diagnosing why your 79Bike Falcon Pro is suddenly losing power is to check the fuse. A blown fuse is one of the most common reasons for power loss in electric bikes.

1. Locate the Fuse: The fuse is usually located near the battery or the controller. Refer to your user manual if you’re unsure where to find it.

2. Inspect the Fuse: Remove the fuse and inspect it. If the metal strip inside the fuse is broken or melted, it means the fuse is blown.

3. Replace the Fuse: If the fuse is blown, replace it with a new one of the same rating. Make sure to use the correct type of fuse to avoid further issues.

Step 2: Check if the Drive Light Board Connection is Loose

Tightening the Drive Light Board Connection

A loose connection in the drive light board can also cause your 79Bike Falcon Pro to lose power suddenly.

1. Locate the Drive Light Board: This is usually found near the handlebars or the front of the bike.

2. Inspect the Connections: Check all the wires connected to the drive light board. Ensure they are securely connected and not loose.

3. Tighten the Connections: If any connections are loose, tighten them carefully. Avoid over-tightening as this can damage the connectors.

Step 3: Press the Battery Power Button and Observe if the Light Flashes

Testing the Battery Power Button

The battery power button can provide valuable clues about the state of your bike’s power system.

1. Press the Battery Power Button: Hold down the battery power button for a few seconds.

2. Observe the Light: If the light on the battery flashes, it indicates that the battery is functioning correctly. If the light does not flash, there may be an issue with the battery or its connections.

Step 4: Turn on the Switch and Check if the LED Light Comes On

Checking the LED Light

The LED light on your 79Bike Falcon Pro is a good indicator of the bike’s power status.

1. Turn on the Switch: Flip the power switch to the “on” position.

2. Check the LED Light: If the LED light comes on, it means the power system is functioning correctly. If the light does not come on, there may be an issue with the switch or the power system.

Step 5: Press the Red Button Next to the Throttle and Twist the Throttle to See if the Vehicle Responds

Testing the Throttle Response

The throttle is a critical component of your 79Bike Falcon Pro’s power system.

1. Press the Red Button: Locate the red button next to the throttle and press it.

2. Twist the Throttle: While holding the red button, twist the throttle to see if the vehicle responds.

3. Observe the Response: If the bike does not respond, there may be an issue with the throttle or the controller.

If Any of the Above Steps Show Abnormalities, the Issue May Be with the Instrument Panel or Drive Light Board

Replacing the Instrument Panel or Drive Light Board

If any of the previous steps indicate an issue, the problem may lie with the instrument panel or the drive light board.

1. Diagnose the Issue: If the fuse, connections, battery, and throttle all seem to be functioning correctly, the issue may be with the instrument panel or drive light board.

2. Replace the Components: It is recommended to replace both the instrument panel and the drive light board to ensure the problem is fully resolved.

If All the Above Steps Are Normal, the Controller May Be Faulty

Contacting the Official Team for Controller Replacement

If all the previous steps show no abnormalities, the issue may be with the controller.

1. Diagnose the Controller: If the fuse, connections, battery, throttle, instrument panel, and drive light board are all functioning correctly, the controller may be the culprit.

2. Contact the Official Team: Reach out to the official 79Bike Falcon Pro support team for a controller replacement. They will provide you with the necessary instructions and parts to get your bike back in working order.

Conclusion

Experiencing a sudden loss of power on your 79Bike Falcon Pro can be frustrating, but with these troubleshooting steps, you can diagnose and fix the issue yourself in most cases. By checking the fuse, drive light board connections, battery power button, LED light, and throttle response, you can identify the root cause of the problem. If the issue persists, it may be necessary to replace the instrument panel, drive light board, or controller. Always refer to your user manual and contact the official support team if you’re unsure about any steps. With a little patience and effort, your 79Bike Falcon Pro will be back to its full power in no time.